How to Program Your Bell Mobility Sanyo Katana 6600

Using this short guide, we will walk you through the process of programming your phone number into your Sanyo Katana 6600 for Bell Mobility. Don’t worry; the process isn’t difficult. In twelve easy steps, you’ll have your phone programmed in no time. And you’ll save up to $25 on in-store programming fees.

So let’s get started! First, though, turn your phone on. If you are using your battery and do not have your phone plugged into your charger, check to ensure that the battery has at least two bars’ worth of charge.

Step 1: Press this series of buttons on your phone: [#][#][your six-digit Lock Code][#]. The screen will display MDN SERVICE PROGRAMMING. Please note: If you do not have your Lock Code, contact Bell Mobility customer service by phone at 1-800-667-0123. Or watch our video Activating Your Bell Cell Phone at to find out how to get your Lock Code.

Step 2: Press the MENU/OK key (centre key)

Step 3: Scroll to Edit and press MENU/OK.

Step 4: Screen will display Mobile Number (MDN).

Step 5: If there is a number in the field erase and then key in your 10-digit mobile number & press MENU/OK.

Step 6: Screen will display MSID.

Step 7: Once again, key in 10-digit mobile number & press MENU/OK.

Step 8: Scroll to _Done_ and press MENU/OK.

Step 9: Phone will power cycle to complete the programming.

And you’re done. You’ve just programmed your Sanyo Katana 6600 phone for Bell Mobility. 

Now that you’ve programmed your phone number, your phone should be ready to use as long as it has already been activated by Bell.  If you have not yet activated your phone, you can have it done in the store or, if you’re a do-it-yourselfer, watch our video on Activating Your Bell Cell Phone for a complete set of instructions.

Related posts